UK
31
SHOWER HEAD
Rotate the spray plate lever clockwise or anti-clockwise to
select the desired spray pattern.
NOTE: WHEN THE LEVER IS IN THE 3 O’CLOCK
POSITION WHEN VIEWED FROM BELOW, THE
WATER SAVING MODE IS SELECTED. THIS PROVIDES
THE SAME SPRAY PATTERN AS POSITION 3, BUT,
DEPENDING ON WHICH WATER SYSTEM THE
PRODUCT IS FITTED TO, OFFERS UP TO 25% WATER
SAVING.
3
Your Midas shower system should be cleaned using only a soft cloth and washing up liquid.
Whilst modern plating and coating techniques are used in the manufacture of these fittings, the coating
will wear if not cleaned properly. The safest way to clean your product is to wipe with a soft damp cloth.
Stains can be removed using washing up liquid.
DO NOT USE: Scouring pads, abrasive cloths or cleaners and cleaning agents that contain acids or
bleach.
LIMESCALE
Rub the nozzles of the shower head to break down scale build up. Should chemical descaling of the head
become necessary, remove the shower head fully and immerse in a mild proprietary descaler.
IT IS IMPERATIVE THAT DESCALING IS CARRIED OUT STRICTLY IN ACCORDANCE WITH
THE MANUFACTURERS INSTRUCTIONS. SUBSTANCES THAT ARE NOT SUITABLE FOR
PLASTICS, POWDER COATED AND ELECTROPLATED SURFACES MUST NOT BE USED.
CLEANING & MAINTENANCE
Right side control knob as viewed from the front
To Next Page
Loading...
