24
UK
Carefully position the riser rail connector so it engages into
the wall fixing bracket and secure via the grub screw on the
bottom wall fixing bracket using the hexagonal key provided.
Ensuring the hose washer is in place, attach the hose to the
hose outlet, taking care not to overtighten. Turn the shower on
towards the wall to allow the water to discharge safely to waste
and run the shower for a few seconds to clear any debris in the
outlet assembly. This process can also be repeated for the fixed
head by adjusting the control knob away from the wall.
Ensuring the hose washers are in the correct position, depress the
anti-swivel locking button on the handset and secure the handset
to the hose. Place the handset into the handset holder.
Shower head attachment
17
16
15
To Next Page
Loading...
