Aqualisa Q - Selecting Your Shower Outlet

Push and hold for
over 3 seconds
Release lever when
desired outlet appears
Drench
Shower
Bath
Selecting your outlet Divert models only
From the Home screen, you can
alternate between outlets by pushing
and holding the Q
TM
lever for over
3 seconds and releasing when the
desired icon appears. This can be
done upon starting the shower,
or during showering.
OUTLET ICONS
By default your
Q
TM
controller will
show the Shower icon
as the primary outlet
and the Drench icon as
secondary. To change,
go to Settings menu,
Configure Outlets
(page 19).
SELECTING BATHFILL
If you have a Q
TM
shower with a bathfill, the
Q
TM
controller can oer specific bath functionality.
See pages 14 and 19 for more information.
9