Universal shower kits installation guide page 12
After installation...
Adjustable head user guide
1. To select the desired spray pattern rotate the shower spray cassette clockwise or anti-clockwise.
2. To select the preferred height for the shower head, depress the handset holder levers fully to enable
the slider to be moved up or down the rail.
3. Angular adjustment is made by carefully but firmly pulling forwards or pushing back the shower head
against the knuckle ratchet in the holder.
Fixed head concealed and exposed user guide
1. To select the desired spray pattern rotate the shower spray cassette clockwise or anti- clockwise.
2. The angle of the fixed shower heads can be adjusted. The shower head is mounted on a multi
directional ball joint to allow for angular adjustment in any direction by carefully holding the shower
spray cassette and moving the head to the desired angle.
Run through the Aqualisa shower head operation with the purchaser and hand them this guide.
Complete and post the Aqualisa shower head guarantee card or register online at www.aqualisa.co.uk.
.
Cleaning
Your Aqualisa shower head system should be cleaned using only a soft cloth and washing up liquid.
DO NOT USE ABRASIVE CLEANERS
To reduce the requirement for chemical descaling in hard water areas, the shower heads incorporate rub clean teats. Any scale build up that
may occur in any of the holes can be broken down by gently rubbing the flexible tips of the jets during use.
Should chemical descaling of the head become necessary, unscrew and remove the shower head cassette and fully immerse in a mild
proprietary descalent.
It is imperative that descaling is carried out strictly in accordance with the manufacturers instructions. Substances that are not suitable for
plastics and electroplated surfaces must not be used.
To Next Page
Loading...
