Universal shower kits installation guide page 11
Fix the wall stay and spacer to the wall using
the screws provided.
6
Carefully tighten the ‹÷¢” nut using either 31mm A/F spanner or a tool with
smooth jaws just sufficiently to compress the ‘O’ ring and achieve a
watertight seal.
7
Carefully screw the shower head to the shower
head arm taking care not to damage the
plated surfaces. Carefully tighten the shower
head with a suitable spanner or a tool with
smooth jaws just sufficiently to lock the head
in position.
8
Remove the spray cassette and run the shower for a few seconds to flush out
any debris that may be present and check for leaks. Refit the spray cassette.
9
To Next Page
Loading...
