5.2 Manually Save AM/FM Radio Stations to Memory
1. Tune to the station you would like to be saved as a preset.
2. Press and hold the PLAY/PAUSE button and the stereo will display ‘SAVE CH1’.
3. Turn the Rotary Selector to select the desired preset slot you would like to save the current
station to.
4. Press the Rotary Selector to save the preset.
5. Upon successfully saving a preset the preset number that was chosen will be shown in the
right corner.
Presets are only for the current band you are on. Each band FM1, FM2, FM3, AM1 and AM2 has six presets for a
total of 30 (18x FM & 12x AM).
5.1 Listening to AM/FM Radio
1. Enter radio mode by pressing MODE and selecting FM1, FM2, FM3, AM1 or AM2.
2. Press BAND button to select the radio band.
3. Navigate the available stations using the FAST REWIND / FAST FORWARD buttons.
4. Press FAST REWIND / FAST FORWARD to seek another station.
5. Press and hold FAST REWIND / FAST FORWARD for manual tuning. (Manual tuning will
time out after 5 seconds of no action then will revert back to Seek/Auto).
5.3 Automatically Save AM/FM Radio Stations to Memory
Press and hold the BAND button for 2 seconds to auto store stations to preset locations 1-6 of
bands FM1-FM3 when in FM or AM1-AM2 when in AM.
5.4 Listening to Saved Radio Memory
1. Press the PLAY/PAUSE button and the stereo will display CH ‘X’.
2. Turn the Rotary Selector to the desired preset channel.
3. Press the Rotary Selector to start listening to the preset selected.
10www.aquaticav.com
Listening to AM/FM Radio GP1 WATERPROOF STEREO
To Next Page
Loading...