1. Enable Bluetooth Audio mode by pressing MODE and selecting Bluetooth.
2. Switch on your Bluetooth Audio device.
3. Select ‘AQUATIC AV GP1’ from the list of available devices to pair. No password should be
required however if prompted for a password use ‘0000’.
4. A Bluetooth logo will illuminate on the stereo’s LCD to verify Bluetooth is connected.
3.2 Pair with Bluetooth Audio Device
3.1 Listening via Bluetooth
The Bluetooth Audio menu is accessible by pressing the MODE button and is used to connect a
Bluetooth Audio device or disconnect a Bluetooth Audio device that has already been paired.
3.3 Listening via Bluetooth Audio Device
1. Bluetooth Audio mode will be activated once a Bluetooth Audio device is paired in any
mode. Use MODE to change to Bluetooth Audio mode to listen to music from your device.
2. Play the song from device and the sound will play through the stereo.
3. Press PLAY/PAUSE to play or pause the song.
4. Press FAST REWIND / FAST FORWARD buttons to play previous/next song file.
5. Previous/next track and volume up/down can also be controlled directly from your
Bluetooth Audio device.
3.4 Bluetooth Multi-link
A second Bluetooth Audio device can pair to the stereo even when music is playing from the first
Bluetooth Audio device.
1. Long press MODE to unlink first device.
2. Pair second device by selecting ‘Aquatic AV GP1’ in the device’s Bluetooth menu.
3. Once paired, playing music from device 2 will override device 1 and the stereo should begin
playing from device 2.
4. Should you wish to play music from the first device again, repeat steps 1, 2 & 3.
Bluetooth functions are device specific and not all devices will allow Fast Forward/Rewind or Next/Previous to work.
Listening via Bluetooth GP1 WATERPROOF STEREO
8www.aquaticav.com
To Next Page
Loading...