AQUOR Wall Hydrant V1+ - Overview; Included in this Kit

www.aquorwatersystems.com
1-800-458-1749
Aquor
®
Wall Hydrant V1+
ASSE 1019C / ASME A112.18.1 / CSA B125.1 APPROVED
3
The Aquor
®
Wall Hydrant is a flush-mounted
hydrant with twist-lock connection system
designed for outdoor use.
The wall hydrant is intended to be installed in the
exterior walls of homes and buildings. Upon
disconnection, a small amount of water self-
drains from the outlet. The Aquor
®
hose
connector has a built-in vacuum-breaker for code
approved anti-siphon protection.
Read this entire instruction sheet before installing
to ensure proper installation. The information in
this manual is subject to change without notice.
Installation must comply with local codes and
ordinances.
Please leave this manual with the property owner
after completing the hydrant installation.
INCLUDED IN THIS KIT
1x Wall Hydrant
1x Hose Connector (CN-VB2)
1x Debris Cover
3x #10 Mounting Screws
OVERVIEW
Overview