AQUOR Wall Hydrant V1+ - Technical Specs

www.aquorwatersystems.com
1-800-458-1749
Aquor
®
Wall Hydrant V1+
ASSE 1019C / ASME A112.18.1 / CSA B125.1 APPROVED
5
Technical Specs
• Allows user to access water instantly by connecting
under full water pressure.
• Robust O-ring connection system ensures a reliable
leak-proof seal, even at high water pressures.
• Stainless steel operating rod and pressure-closed
valve provide zero-maintenance reliability for years.
• Hydrant automatically self-drains upon
disconnection to provide freeze protection.
• Hydrant comes standard with ” female NPT
inlet. Rotatable 90° elbow and other optional
inlets available.
• Each hydrant kit includes a polymer hose
connector with ” GHT threading.
• Any ” accessory (e.g. water timers, splitters,
regulators) can be attached to end of hose connector.
• Aquor
®
hose connector contains vacuum breaker
for code approved anti-siphon protection.
• Inlet/Outlet: 1/2” NPT, 3/4” GHT
• Flow rate: 6.8 GPM @ 52 PSI
• Operating water pressure: 25 - 125 PSI
• Operating temperature range: 33° - 140°F
• Approvals: ASSE 1019C, ASME A112.18.1,
CSA B125.1
• Warranty: 10-year stainless components,
5-year polymer components
TECHNICAL SPECS
SKU
HHP002
HHP004
HHP006
HHP008
HHP010
HHP012
Stem Length (A)
2” Hydrant
4” Hydrant
6” Hydrant
8” Hydrant
10” Hydrant
12” Hydrant
Overall Length (B)
3 /” (92 mm)
5 /” (138 mm)
7 /” (188 mm)
9 /” (237 mm)
11 /” (287 mm)
13 /” (337 mm)
This ASSE 1019 device is intended for irrigation use
and outdoor watering. It shall not be subjected to
more than 12 hours of continuous water pressure as
directed by ASSE code requirements.
Overall Length (B)
95°
distance from exterior wall to inlet
(A)
Optional 90° elbow inlets reduce overall length by
1/2” (13 mm).
2
/” (72 mm) 3 /” (79 mm)
2 /” (72 mm)
3
/” (88 mm)