8
General Usage and Screen Informaon
Important: The Smart Screen Display supplied with the Smooth Flite is a touch screen
display. It is used in both setup and provides feedback to the user about baery voltage and
milliamps used. The screen can be mounted in a model for quick and easy use. However the
Smooth Flite will operate during normal ying mode without the Smart Screen connected.
Main Smart Screen Display
Baery 1 (B1) and Baery 2 (B2)
Shows input voltage of both baery packs.
Servo
Shows Regulated voltage to servos
Total mA
Shows total milliamps since last charge.
Press here to enter the Main Menu
Last mA
Shows milliamps used since model was last powered up
and resets when model is turned o. Press here to reset
ight mer and Last mA.
FL-T
Flight mer since model was turned on. The mer only
operates while on the main screen.
FL-N
Flight number since reset. Gives an indicaon of number
of ights on the models airframe.
Baery Indicators
Shows the remaining capacity in the baeries from 100%
- 0%. NEVER FLY IF THE INDICATORS ARE IN THE RED.
Below is an overview of each screen on the Smooth Flite
To Next Page
Loading...
Need help?
General