3412620 W/BAR LC79 08/22 ON 60.3 MT BK W/FLR SFTY SENS AF20 8-10
3412630 W/BAR LC79 08/22 ON 60.3 MT BK N/FLR SFTY SENS AF20 8-10
3412650 W/BAR LC76/8/9 08/22 ON 60.3 W/FLR SFTY SENS AF20 8-10
3412660 W/BAR LC76/8/9 08/22 ON 47.5 W/FLR SFTY SENS 9/9.5/Z8/10
3412670 W/BAR LC76/8/9 08/22 ON 47.5 N/FLR SFTY SENS 9/9.5/Z8/10
3500910 – ARB LED FOG LIGHT KIT– LRG
3500520 – ARB AUX FOG LIGHT LOOM–(NON FACTORY FOG LAMP
VEHICLES)
3500680 – FOG LAMP HOUSING CLEAR LENS KIT.
3512040 – STONE SHIELD AND RADIATOR GUARD.
3512140 – LC70 WINCH FIT KIT 08/22 ON
REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG;
When installed in accordance with these instructions, the front protection bar does not affect operation
of the SRS airbag.
ALSO, NOTE THE FOLLOWING:
This product must be installed exactly as per these instructions using only the hardware
supplied.
In the event of damage to any bull bar component, contact your nearest authorised ARB
stockist. Repairs or modifications to the impact absorption system must not be attempted.
Do not use this product for any vehicle make or model, other than those specified by ARB.
Do not remove labels from this bull bar.
This product or its fixing must not be modified in any way.
The installation of this product may require the use of specialized tools and/or techniques.
It is recommended that this product is only installed by trained personnel.
These instructions are correct as at the publication date. ARB Corporation Ltd. cannot be held
responsible for the impact of any changes subsequently made by the vehicle manufacturer.
During installation, it is the duty of the installer to check correct operation/clearances of all
components.
Work safely at all times.
Unless otherwise instructed, tighten fasteners to specified torque.