EasyManuals Logo

ARB 3940420 User Manual

ARB 3940420
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Last Rev Date 17/05/2019
Page 1 of 36
Fitting instructions# 3789528
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
Part Number:
3940420
Product Description:
SUMMIT SAHARA BULL BAR
Suited to vehicle/s:
FORD RANGER PX MK2 & EVEREST (NOT TITANIUM)
Optional Kits:
5100310 SAHARA TUBE KIT PXII RANGER
5100230 BUFF KIT 2 PCE REAR SAHARA BUMPER
3500720 WINCH INSTALL KIT
3500640 ARB AUX FOG LIGHT ADAPTOR
3500530 ARB AUX FOG LIGHT LOOM (2015 ON WILDTRAK,
EVEREST & ON-FACTORY FOG LAMP VEHICLES)
3500680 FOG LAMP HOUSING CLEAR LENS KIT
3500590 FOG LIGHT KIT (LH&RH LIGHTS)
3540200 ADAPTIVE CRUISE CONTROL KIT
3540190 ADAPTIVE CRUISE CONTROL COVER
NOTE: ARB recommends purchase of correctly colour coded sensors from a Ford dealer.
Painting over sensors is not recommended as sensor operational faults can result.
WARNING
REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG;
When installed in accordance with these instructions, the front protection bar does not affect operation of
the SRS airbag.
ALSO, NOTE THE FOLLOWING:
This product must be installed exactly as per these instructions using only the hardware supplied.
In the event of damage to any bull bar component, contact your nearest authorised ARB stockist. Repairs or
modifications to the impact absorption system must not be attempted.
Do not use this product for any vehicle make or model, other than those specified by ARB.
Do not remove labels from this bull bar.
This product or its fixing must not be modified in any way.
The installation of this product may require the use of specialized tools and/or techniques
It is recommended that this product is only installed by trained personnel
These instructions are correct as at the publication date. ARB Corporation Ltd. cannot be held responsible
for the impact of any changes subsequently made by the vehicle manufacturer
During installation, it is the duty of the installer to check correct operation/clearances of all components
Work safely at all times
Unless otherwise instructed, tighten fasteners to specified torque
ARB 4x4 ACCESSORIES
Corporate Head Office
42-44 Garden St Tel: +61 (3) 9761 6622
Kilsyth, Victoria Fax: +61 (3) 9761 6807
AUSTRALIA 3137
Australian enquiries sales@arb.com.au
North & South American enquiries sales@arbusa.com
Other international enquiries exports@arb.com.au
www.arb.com.au

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ARB 3940420 and is the answer not in the manual?

ARB 3940420 Specifications

General IconGeneral
BrandARB
Model3940420
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals