To Next PageTo Next Page
Need help?Do you have a question about the ARB 6173952 and is the answer not in the manual?
General| Brand | ARB |
|---|---|
| Model | 6173952 |
| Category | Automobile Accessories |
| Language | English |
Remove sports bars, cabin guards, and bed liners before canopy installation.
Clean tub rails, apply protective stickers and foam tape for sealing.
Fit front head board rail bracket, drill holes, and secure with rivets.
Mount and secure front corner brackets, including drilling and applying seals.
Fit rear corner brackets, apply bumpons, and prepare for bed liner refitting.
Identify wiring loom parts, connect fuse adaptor, and route harness through cabin.
Disconnect/reconnect vehicle connectors, route wiring, and connect to tail lights.
Cable tie wiring along chassis and secure harness connections in cabin area.
Unscrew canopy from pallet, release latches, and remove internal mouldings.
Place canopy on tub, align, secure front and rear brackets, and check clearances.
Adjust canopy, check door/window operation, apply tailgate tape, and water test.
Set interior light switch and test vehicle brake light function.
Manage keys, test door push buttons, and adjust latches for simultaneous operation.
Adjust lift up window operation and door frame strikers for proper alignment.
Trim bed liner for clearance, focusing on front and rear corners.
Mount bed liner brackets over canopy mounting brackets, ensuring correct torque.
Fit bed liner to tub, install tailgate liner, and complete canopy fitting.
Details ARB product warranty, coverage, and exclusions.
Provides critical safety precautions for canopy use and operation.
Outlines routine checks, lubrication, and cleaning for canopy longevity.
Checklist for installers to confirm all fitting and operational steps are completed.
