If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
IMPORTANT:
• Vehicle bodies and vehicle specific installation can vary, so please read the following
instructions as they refer to important information, which could affect the quality of the
final installation.
• It is advisable to have the canopy fitted by an authorised dealer.
• The majority of installation can be completed by one person, (however 4 people will be
required to lift the canopy onto the vehicle).
FITMENT:
• For Bed Liners additional time for fitting is required and trimming of bed liners is
required. Fitting with under rail bed liners is recommended (ARB part number
KUL2664). Tailgate liners must have the tailgate over rail portion trimmed off.
• Cabin Guards and Sports bars and bed liners must be removed prior to canopy fitment.
These sports bars can be returned to the customer if required.
To Next Page
Need help?
General
