28/02/2020 Page 13 of 41 ARB Copyright 2018 3789452
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
SECTION 3: FITTING THE VEHICLE WIRING
The diagram below offers a reference to assist the routing of wires
3.0) The vehicle electrical patch wiring loom (668PJ019)
has 3 parts. The main patch loom, vehicle brake
light patch loom and the blade fuse adaptor.
Ensure the blade fuse adaptor is fitted with a
7.5 Amp and 10 Amp blade fuse as shown
opposite.
To Next Page
Loading...
