28/02/2020 Page 12 of 41 ARB Copyright 2018 3789452
If you have any queries regarding the installation of this product please contact the distributor from whom it was purchased, or alternatively the ARB office in your state.
Head Office – ARB Corporation Ltd VIC: 42-44 Garden Street, Kilsyth, Victoria, 3137 Tel: (03) 9761 6622 Fax: (03) 9761 6807
WA:(08) 9244 3553 NSW: (02) 9821 3633 ACT: (02) 6280 7475 SA: (08) 8244 5001 QLD: (07) 3872 3872 NT: (08) 8947 2262 TAS: (03) 6331 4190
2.21) To the rear brackets, assemble 2 rivets
(6609087). Repeat on other side of tub for the
opposite bracket.
2.22) If a bed liner is now to be refitted, do this after
measuring off bracket positions on the tub and
measuring these out on the bed liner and cut
away sections of the bed liner to suit the canopy
mounting brackets. ARB bed liners have scribe
marks marked on the back where to cut them.
To Next Page
Loading...
