FEATURES
The Deluxe Awning room features a durable waterproof floor and its own separate ceiling, enhancing
insulation from the sun. All 4-wall panels incorporate zipper operated access doors.
The rear wall, located towards the vehicle, can be unzipped to provide access to the vehicle. The mesh
pocket organizer can be located on the right or left of the rear panel to house your magazines or personal
items, helping everything have its place. Two zippered ports located in the top corners allow for power cable
access and power cord guides are incorporated into the roof corners to keep cables tidy and safe.
The 3 exterior walls are dual layered, featuring solid external panels, which can be zipped closed for
protection and privacy or rolled up to reveal the internal mesh panels. The D shaped front mesh panel can be
fully opened to reveal the natural setting while the side mesh incorporates zippers in the middle and base to
accommodate entry and exit of the room.
INSTALLATION AND TECH SPECIFICATIONS
The ARB Deluxe Awning Room quickly attaches to your ARB awning via the awning rope tracks and awning
room clips. Finish your setup by pegging down the oor through the supplied webbing straps to secure the
room. Take care when setting up the awning to provide suf cient “fall” to drain away rainwater and secure
the awning poles in the event of wind gusts.The height of the awning varies dependent upon vehicle set-up,
the awning room design can accommodate awning heights between 1.9m / 6.2ft to a maximum of 2.1m /
6.8ft from ground level.
• Exterior walls are made from 300D Oxford Polyester outer UV treated
• Heavy duty, polyethylene waterproof oor
• Cross ow ventilated mesh roof
• Heavy duty nylon hooks for awning pole attachment
• Midge-proof mesh side panels
• High mounted cable access ports and cable guides for lighting solutions
• Internal mesh pocket organizer
• Accessories include nylon stuff sack for storage, 2 guy ropes, 6 pegs
• Weight 8 kg / 17.6 lbs.
ARB Deluxe Awning Room with Floor 2 - 3
To Next Page
Loading...
