Flex ECO 6S/X MRX Instruction Manual
August 2017 v1.0
Page 24 of 34
4.2.5 Other Function Output Relays Settings
Listed below are other types of functions that can be outputted through the K10 Function output
relay via the infrared IR programmer unit. Please contact ARC representative for more details.
LV : Function relay closes when receiver voltage is low.
ID : Function relay works simultaneously with all motion commands.
NORMAL : START function + AUX with normal momentary output.
TOGGLE : START function + AUX with toggled/latching output.
TOG&E : START function + AUX with toggled/latching output affected by the STOP
command (Function relay opens when STOP button is pressed down).
EXT : Function relay works simultaneously with the receiver MAIN relays.
HORN : Function relay closes for up to 3 seconds when START command is executed at
transmitter power on and then becomes a normal momentary output thereafter.
To Next Page
Loading...
