Arcam 290 - Technical Specification Delta 290 Amplifier; Delta 290 Output Power and Distortion Specs

TECHNICAL SPECIFICATION
Delta 290 Amplifier
Output cower (20Hz-20kHz at 0.5%THD) 70W, both channels into 80
140W, single channel into 40, 1kHz
Harmonic Distortion, 60W, 80 at 1kHz
0.02% typical
Peak current rating
± 18 amps
Tone controls (typical variation)
± 5dB at 100Hz and 10kHz
L/R Crosstalk
-72dB at 1kHz
INPUTS
Line inputs:
Sensitivity 165mV
Noise (CCIR) ref. rated power
-99dB typical
Input impedance
4.7kO
Overload margin
>50dB
A/V loop input (A/V mode)
Sensitivity 690mV
Input impedance
4.7kO
Power amp in
Sensitivity 670mV
Input impedance
7.5kQ
Phono board (if fitted):
Sensitivity 2.6mV MM, 260jrV MC
Noise (CCIR) ref rated power
-79dB MM, -73dB MC
Input impedance
47kQ MM, 300Q MC
Overload margin
35dB
OUTPUTS
Preamplifier Output
Nominal output level
800mV
Maximum output level
8V
Output impedance
1000
Tape/ AUX outputs:
Output impedance
100Q
Headphones:
Maximum output level into 600Q
8V
Output impedance 100Q
Mains voltage
230V/115V ±12%
Power consumpdon(max) 550VA
Dimensions W/D/H mm.
430x315x92
Weight nett
6.5kg
packed
7.7kg
Supplied accessories Mains lead
CR 25 Handi-Remote
E&OE.