Arcam 290 - Technical Specification Delta 290 P Power Amplifier; Delta 290 P Output Power and Distortion Specs; Troubleshooting and Support; Customer Service and Queries

TECHNICAL SPECIFICATION
Delta 290P Power Amplifier
Output power (20Hz-20kHz at 0.5%THD) 70W, both channels, 8Q
"-140W, single channel, 4Q, 1kHz
Harmonic Distortion, 60W, 8Q at 1kHz
0.02% typical
Peak current rating
±18 amps
Input impedance
7.5kQ
Input sensitivity
670mV for 75W/ 8fi
Gain (1kHz)
31.3dB±0.2dB
Frequency response
10Hz-20kHz ± 0.5dB
Noise (CCIR) ref. rated power
-lOOdB
Mains voltage
230V/115V ±12%
Power consumption (max)
550VA
Size W/D/H mm.
430x300x92
Weight nett
6.0kg
packed
7.0kg
Supplied accessories
Mains lead
E & O E
PROBLEMS?
If your dealer is unable to answer any query regarding this or any other Arcam product
please contact Arcam Customer Services on +44 (0)1223 440964 or write to us at the
address on the back cover of this handbook.