Arcam Delta 60 - Technical Specification; Frequency Response

Delta 60 integrated amplifier handbook
Technical specification
OUTPUT POWER (typical)
Both channels
8 ohms 55W
(20Hz to 20kHz, 0.5% THD)
Single channel
8 ohms 60W
4 ohms 95W
Peak current delivery
± lOA
Harmonic distortion
SOW, 8 ohms, at 1 kHz 0.02%
FREQUENCY RESPONSE;
Disc
better than +0.3, -0.5dB from 40Hz - 35kHz,
lyp. -3dB at 20Hz
Line
±0.5dB 30Hz to 35kHz
typ.-3dB at lOHz, 80kHz
iNPUTS
Disc, Moving Magnet
Sensitivity 1.9mV
Noise (CCIR)-76dB
Input impedance 47k ohms/I OOpF
Overload margin at 1 kHz 32dB
11
Disc, Moving Coii
Sensitivity 1 90 /aV
Noise (CCIR) -68dB
Input impedance 220 ohms/4.7nf
Overload margin at 1 kHz 32dB
Tuner, Tape 1+2
Sensitivity 220mV
Noise (CCIR) ref. 1 W output -84dB
Input impedance 1 Ok ohms
Overload margin at 1 kHz 50dB
CD
Sensitivity 360mV
Input impedance 6k ohms
OUTPUTS
Tape 1 and 2
Nominal output 220mV
Output impedance 2k ohms
Crosstaik all inputs 70dB at I kHz
Power consumption
250VA maxirrium
Dimensions
430 mm wide
64 mm high
295 mm deep (excluding knobs)
Weight
5 kg Net
6 kg Packed