Arcam SA20 - Advanced Connectivity Options; Network Connection Setup; RS232 Control Interface; USB for Software Updates

EN
EN-9
Network Connection
The SA10/SA20 can be connected to a local network,
so that it can be controlled and monitored remotely.
Please refer to the control document which can be
found at www.arcam.co.uk for further information.
RS232 Connection
The RS232 input is for optional connection to a home
automation system or personal computer. Various third-
party systems are available providing sophisticated
control over all your entertainment devices. Contact
your dealer or installer for details. The technical details of
the remote control protocol are available upon request,
by contacting Arcam at support@arcam.co.uk.
USB Connection
The USB port is used for software updates only. For the
latest software as well as further information, please visit
www.arcam.co.uk.
POWER INLET
110-120V/220-240V ~ 50/60Hz
SUPPLY
VOLTAGE
SWITCH POSITIONS
115 = 110 - 120V ~
230 = 220 - 240V ~
RS232NET USB
5V 100mA
SAT
AV
BD
R
L
CD PVR
STB
PRE
OUT
4-16 OHMS
R L
CLASS 2 WIRING
DIGITAL IN
ANALOGUE IN
PHONO
(MM)
NET
RS232
1 2 3 4NET
Network Router
Home Automation Controller
Home Automation Controller