8
EN
o EOlife X is used with the FlowSense X sensor which is positioned between a non-invasive ventilation interface (mask),
invasive ventilation interface (endotracheal tube), or any type of supraglottic airway device, and a standard self-inflating
bag to manually ventilate a manikin.
o EOlife X allows the user to choose the patient type (adult or child), the ventilation mode (continuous ventilation, CPR
with a 30:2 ventilation ratio or CPR with a 15:2 ventilation ratio), the patient’s height or the patient’s age and the training
mode (blind ventilation or monitored ventilation).
o EOlife X records the ventilation data, which can be exported to another device for research and analysis. EOlife X includes
a Bluetooth low energy wireless module to communicate with such devices.
• Monitored ventilation training:
Based on the inspiratory and expiratory flow rates measured during ventilation, EOlife X calculates and records the
main ventilation parameters (insufflation volumes, tidal volumes, ventilation frequency and leakage) and gives real-
time feedback on the ventilation performed. EOlife X also shows the target ventilation values (in accordance with the
guidelines issued by the AHA and ERC international scientific committees) to guarantee adequate ventilation.
• Blind ventilation training:
Based on the inspiratory and expiratory flow rates measured during ventilation, EOlife X calculates and records the
main ventilation parameters (insufflation volumes, tidal volumes, ventilation frequency and leakage) but does not give
the user real-time feedback on the ventilation performed and does not show target ventilation values.
Self-inflating bag
Mask
VI. Equipment and accessories
Equipment Part number
EOlife X A0000089
EOlife X battery A0000110
Charger and 4 adapters A0000029
FlowSense X (x1) A0000093
FlowSense X (x10) A0000095
The equipment and accessories can be ordered from approved distributors.
Note
The ventilation interface and the self-inflating bag are accessories not supplied by ARCHEON.
To Next Page