Arcom VIPER - Introduction

VIPER Introduction
Introduction
The VIPER is an ultra low power PC/104 compatible single board computer based on
the Intel 400MHz PXA255 XScale processor. The PXA255 is an implementation of the
Intel XScale micro architecture combined with a comprehensive set of integrated
peripherals including, a flat panel graphics controller, DMA controller, interrupt
controller, real time clock and multiple serial ports. The VIPER board offers a wide
range of features making it ideal for power sensitive embedded communications and
multimedia applications.
The board is available in the following standard variants:
VIPER-400-M64-F32: Intel XScale
TM
PXA255 400MHz microprocessor, 64MByte
SDRAM, 32MByte FLASH.
•
•
•
•
VIPER-400-M64-F16: Intel XScale
TM
PXA255 400MHz microprocessor, 64MByte
SDRAM, 16MByte FLASH.
VIPER-400-M64-F32-I: Intel XScale
TM
PXA255 400MHz microprocessor, 64MByte
SDRAM, 32MByte FLASH, Industrial temperature range.
VIPER-400-M64-F16-I: Intel XScale
TM
PXA255 400MHz microprocessor, 64MByte
SDRAM, 16MByte FLASH, Industrial temperature range.
For alternative memory configurations, please contact Arcom.
© 2004 Arcom Issue H 4