VIPER Introduction
VIPER support products
The VIPER is supported by the following products:
VIPER-UPS (Uninterruptible Power Supply)
The VIPER-UPS serves as a 5V DC power supply and battery back up system for
the VIPER. The UPS accepts between 10 – 36 VDC (10-25VAC) input and
generates the +5V supply for the VIPER. In addition to this, it includes an intelligent
battery charger/switch capable of using either the onboard 500mAHr NiMH battery
or an external sealed lead acid rechargeable battery. For further details, see
www.arcom.com/products/icp/pc104/processors/viper_UPS.htm.
•
VIPER-ICE (Industrial Compact Enclosure)
The VIPER-ICE is a simple low cost aluminum enclosure, which provides easy
connection to all on board features. The enclosure includes the VIPER-UPS and
optionally a color Q-VGA (320x240) TFT flat panel display and analog touch screen.
•
• VIPER-FPIF1 (Flat Panel Interface)
The VIPER-FPIF1 is a simple board that enables easy connection between the
VIPER and an LCD flat panel. See section VIPER-FPIF1 details
, page 33 for further
details. Contact Arcom (see Appendix A – Contacting Arcom
, page 72) for
purchasing information.
© 2004 Arcom Issue H 8
To Next Page
Loading...
