Arctic Cat PROWLER XTX - Engine Break-In and Brake Maintenance; Engine Break-In and Brake Pad Burnishing

39
I = Inspect and clean, adjust, lubricate, replace as necessary T = Tighten R = Replace
C = Clean
* = Dealer maintenance
**When using Arctic Cat ACX All Weather synthetic oil, oil change interval can be increased to
every 1,000 miles or every year.
Maintenance Schedule
Item Page
Initial 100
miles
Every 100
miles
Every 300
miles
Every 500
miles
Battery 44 I I
* Engine nuts and bolts — I I
* Valve clearance — I I
Spark plug(s) 47 I I
47 Replace every 4000 miles (6436 km) or 18 months
Liquid cooling system 40 I Inspect every time before operating
Gas hoses 34 I Inspect every time before operating
34 Replace every 2 years
Engine/transmission oil and fil-
ter
41 R R**
Air filter 47 I I
Gear lubricant
(front differential - rear drive)
42 I I
42 Replace every 4 years
V-belt 48 I I
Spark arrester/muffler 49 C
Tires/air pressure 48/17 I Inspect every time before operating
* Brake components 42 I Inspect every time before operating
Brake fluid 42 I *Replace every 2 years
Brake hoses 43 I *Replace every 4 years
* Steering — I Inspect every time before operating
* Suspension (Ball joint boots,
drive axle boots front and rear,
tie rods, differential and rear
drive bellows)
— I Inspect every time before operating
* Chassis nuts and bolts — I T
Wheel lug nuts 49 T T
Frame/welds/racks — I I
Electrical connections — I I
Headlight/taillight-brakelight 49 I Inspect every time before operating
Air filter drains — I Inspect every time before operating
Accelerator pedal 27 I Inspect every time before operating
ROPS 52 Inspect every time before operating
Occupant side restraints 51 Inspect every time before operating
Wheel nuts 49 I I