Series Techoo
New low-level
configuration software
needs to be downloaded
into the spa system
without it the system
will not be operable.
Contact our toll free line
for technical support
(1800842).
Note: this line is dedicated
[VHZZPZ[H\[OVYPaLKZLY]PJL
technicians and dealers only.
o loleel conguration softare
in sstem
StepbyStep
Measure water
temperature with a
DIGITAL thermometer
and compare its
reading with temp. on
the display. If temp.
reading is different,
replace heater.
Remove spa cover
and let spa cool down.
Add cold water and
lower filter cycles.
If problem persists
replace spa pack.
Remove
spa cover
and let
system cool
down, until
the error
clears.
Replace
spa pack,
if problem
persists
Replace
spa pack,
if problem
persists
Measure water
temperature
with a DIGITAL
thermometer
s the
temperature
reading on the
displa correct
yes
no
Add cold
water and
lower filter
cycles.
Replace
heater, if
problem
persists
Water temp. in the spa has reached 108°F
OH error message / ow chart stepbystep
Flow chart
StepbyStep
UPL error message / StepbyStep