Argo 2S - 機器之清潔 Cleaning

CH3 安裝 Installation Original
16
3.2 機器之清潔 Cleaning
(1) 移動任一滑道前先除去防銹劑。
Remove rust preventative before moving any slideways.
(2) 防護層最好以清潔的刷沾石腊油除去之，當保護層軟化後以清潔破布擦乾淨。
The coating is best removed by using paraffin applied with a clean brush. When the
coating has softened, remove with clean rags.
(3) 以油或黃油潤滑潤滑點，參考此說明書的潤滑部份 P38。
Oil or grease all lubrication points. Refer to the lubrication section of this manual P
38.