CH7 預防保養 Preventive Maintenance Original
42
為了確保機器之精密與增加使用壽命，我們提供下列預防保養表給操作者。
For securing the accuracy and life of the machine, we offer the following preventive
maintenance charts.
(1) 操作前必須依照潤滑說明把各部位加油。
It is necessary to oil each lubrication point before operation.
(2) 檢查手動油泵的油量，不足須補充。
Check the level of the oil lubricator and fill if necessary.
(3) 操作完畢，所有固定桿放鬆，工作台面須清除乾淨並潤滑少許
的油，以保護工作台面。
It is necessary to release the clamps, clean and lubricate the table
after operation.
(1) 檢查各部調整楔之鬆緊情形，並作適當的調整。
Check all the gibs and adjust if necessary.
(2) 檢查所有螺桿與螺帽間之間隙，並作適當的調整。
Check all the backlush between screws and nuts, and adjust if
necessary.
(1) 根據精度檢查表核對各部精度。
Check and adjust the machine accuracy.
To Next Page
Loading...
Need help?
General