Argo 2S - Page 49

CH8 保養 Maintenance Original
46
剎車環更換步驟 BRAKE SHOE REPLACEMENT
重覆第 45 頁 1-6 之順序後
(1) 取下四個螺絲 A
(2) 取下兩個螺絲 B
(3) 從座內推出軸承轂 C
(4) 取下三個螺絲 D
(5) 更換剎車塊
(6) 更換後鎖緊螺絲 D，並 用 墊 圈 與 螺 帽
固定
Repeat the sequence 1 to 6 on page 45
(1) Remove 4 screws A
(2) Remove 2 screws B
(3) Push bearing hub C clear of housing.
(4) Remove 3 screws D
(5) Replace shoe.
(6) Ensure screws D are fully tight ened
and locked with washers and nuts.