18
V 12/15
APPLIANCE START-UP
Open the packaging and remove the box from above. Remove the product and the other elements supplied (illustrated in
the box below).
LCD remote control
Type AAA
batteries for
the remote
control
Round fitting for window (1) to be positioned
between the end of the tube and the end
fitting for the window
End fitting for
window (2)
Flat fitting for positioning between the air
discharge outlet and the
hose
Hose
Screws
Clamp Cap Cord winder Drain hose
Window unit kit (3 pcs)
Round fitting for window
unit, to be positioned
between the end of the
tube and the window unit
Window unit
Cap
Position the product vertically on a flat and stable surface, as close as possible to a window and at least 50 cm from
walls or other nearby obstacles.
To Next Page
Loading...
