EasyManua.ls Logo

Argo THOR PLUS - CONTROL BY REMOTE CONTROLLER; CONTROL BY CONTROL PANEL

Argo THOR PLUS
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34V 12/23
1. WIFI button
2. ON/OFF button
3. FILTER RESET button
4. FAN SPEED button
5. UP/DOWN (+/-) buttons
6. MODE button
7. SLEEP button
8. SWING button
8
7 6
1
234
5
FOR OPTIMUM OPERATION OF THE REMOTE CONTROL, ADDRESS THE TRANSMITTER HEAD TOWARDS
THE RECEIVER LOCATED ON THE AIR CONDITIONER.
CONTROL BY REMOTE CONTROLLER
1. ON/OFF button
2. °C/°F button
3. FAN button
4. DISPLAY button
5. IFEEL button (not active)
6. TIMER button
7. Health/clean button (not active)
8. Temp and Timer setting buttons
9. TURBO button (not active)
10. MODE button
11. SLEEP button
12. Vertical SWING button (not active)
13. Horizontal SWING button
14. ANTI-FUNGUS button (not active)
15. ECO button (not active)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CONTROL BY CONTROL PANEL
1. WIFI BUTTON
Press this button to turn on or off Wi operation (for Wi conguration refer to the paragraph Wi Guide.
2. ON/OFF BUTTON
Press this button to turn the unit on or off.
When switched on, the appliance will start operating according to the last settings (memory function).
3. FILTER RESET BUTTON
This LED indicator comes on every 250 hours of use to signal that the air lter need to be cleaned. Once cleaned,
press the “FILTER RESET” button to reset the count of hours of use.

Related product manuals