Problem:
The time/date/year information on the printed report is incorrect.
Cause:
The correct time/date/year is not properly set up on the tester. (See Tester Set-up Options)
The internal clock battery on the analyzer is low. Replace the internal battery, see Service, above.
If you have other troubleshooting questions,
please visit the support section of our web site.
http://www.argusanalyzers.com/support/index.htm
More:
Manual - Basic Operation
Manual - Tester Setup Options
Manual - Performing a Battery Test
Manual - Interpreting Test Results
Manual - Printing and Saving Test Results
Manual - Service and Troubleshooting
Manual - General Information
Manual - Argus Data Manager Software
Version 1.0
Copyright © 2011 by Argus Analyzers, 2/11
User Manual
Support
Argus Data Manager
Copyright 2008-2011 Argus Analyzers :: Terms of Use :: Privacy Policy
How to Buy
News Room
About Argus
Contact
Site Map
To Next Page
Loading...