Arico TC5E - 1-5 Operating Modes and Controls

-6-
1-4-2 Operating modes
TC5E divide into Main mode and parameter mode. In main mode, press
could entry parameter mode.
Main mode: Controller display PV and SV, use for SV modification.
Parameter mode: Controller display parameter name and its value, use
for value modification.
1-4-3 Control modes
Auto mode: The instrument make auto temperature control.
Manual mode: The instrument follow parameter and make output.
(UNIT field display "P")
Manual/Auto mode change
+ 2 sec
Exchange SV1 and SV2
＋ ＋3 sec: SV1 temperature control.
＋ ＋3 sec: SV2 temperature control.
※Execute SV2 temperature control indicator flash.
(Refer 1-3-1 faceplate description)
1-4-4 The alarm output function disable temporarily
Auto mode
Manual mode