GB - 10
Battery posts, terminals and related
accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and reproductive
harm. Wash hands after handling.
MAINTENANCE AND SERVICE
SAFETY RULES
Accidental engine start up can cause death or
serious injury. Except where specifically
recommended, ALWAYS stop engine, remove
key (electric start models), wait for moving
parts to stop, allow parts to cool and remove
spark plug wire before inspecting, servicing,
adjusting or repairing unit.
Keep equipment in good condition.
Keep safety devices or guards in place and
functioning properly. NEVER modify or
remove safety devices. (See
Operation
for
proper function of Engine/Blade and Traction
Drive Controls.)
Maintain or replace safety and instruction
labels, as necessary.
Follow engine manufacturer’s safety
instruction when servicing engine.
Check all hardware at regular intervals,
especially blade attachment bolts. Keep all
hardware properly tightened.
Before tipping unit, remove fuel and battery (if
equipped).
Ensure all wheel blocks, jack stands and tie
downs will support unit during maintenance.
Replace worn out mufflers immediately.
Continued use could result in fire or explosion.
Sharp edges can cut or amputate fingers or a
hand. Wrap blade or wear sturdy gloves to
service.
Use only replacement parts designed for your
unit. See your Ariens Dealer.
STORAGE SAFETY RULES
Allow engine to cool before storing in any
enclosure.
ALWAYS clean unit before extended storage.
See engine manual for proper storage.
DO NOT store unit inside a building with fuel in
the fuel tank where any ignition sources are
present.
ACCESSORY AND ATTACHMENT
SAFETY RULES
Use only accessories which have been
approved by Ariens and are properly installed.
Check attachments frequently and replace
worn or damaged components with
manufacturer’s recommended parts.
To Next Page
Loading...
