Ariens Apex 52 User Manual

05168815E • 3/19
Printed in USA
Apex
E10
Operator’s Manual
Návod k obsluze
Betriebsanleitung
Instruktionsbog
Lea el Manual del operador
Käyttäjän käsikirja
Manuel de l'opérateur
Manuale d'uso
Gebruikershandleiding
Brukerhåndbok
Instrukcja obsługi
Manual do Operador
Руководство оператора
Návod na obsluhu
Instruktionsbok
Kullanıcı Kılavuzu
Models
991311 – Apex 48
(SN 035000 +)
991312 – Apex 52
(SN 035000 +)

Ariens Apex 52 Specifications

General

Engine Brand	Kawasaki
Engine Power	23 HP
Cutting Width	52 inches
Transmission	Hydrostatic
Deck Material	10-gauge steel
Number of Blades	3
Engine	Kawasaki FR691V
Engine Displacement	726 cc
Speed	8 mph forward/4 mph reverse
Cutting Height	1.5 - 4.5 inches
Warranty	3 years

Summary

WELCOME

REGISTER YOUR PRODUCT!

Guide to registering your Ariens product to activate warranty and establish communication.

MANUALS

Importance of reading provided manuals for safety and control information before operating the unit.

DISCLAIMER

Ariens reserves the right to change product design and manual specifications without prior notice.

SAFETY

PRACTICES & LAWS

Emphasizes following safe working precautions and applicable local rules and laws.

EMISSION CONTROL SYSTEM

Discusses compliance with EPA/CARB regulations and penalties for tampering with controls.

REQUIRED OPERATOR TRAINING

Stresses the importance of reading manuals, understanding controls, and seeking training.

SAFETY DECALS

Safety Decal Locations

Visual guide showing the placement of safety decals on the machine for reference.

Safety Decal Descriptions

Explains the meaning and importance of various safety decals found on the unit.

SAFETY INSTRUCTIONS

Preparation Before Operating

Outlines pre-operation checks including decals, interlocks, and clearing the area.

Operating

Details safe operating procedures, including controls, emergency stops, and environmental considerations.

Fire and Fuel Specific

Safety guidelines related to handling fuel, preventing fires, and refueling procedures.

CONTROLS AND FEATURES

ASSEMBLY

OPERATION

EMERGENCY STOPPING

Steps to immediately stop the unit in case of an emergency situation.

BEFORE OPERATING UNIT

Pre-operation checks including fuel, oil, air cleaner, and safety interlock system.

START THE ENGINE

Step-by-step instructions for safely starting the engine, including choke and throttle usage.

OPERATE UNIT

STOP THE ENGINE

Procedure for safely shutting down the engine and securing the unit.

MOVE UNIT MANUALLY

Steps to bypass transaxles for moving the unit without the engine running.

MAINTENANCE

SERVICE POSITION

Instructions on how to place the unit in a service position for maintenance tasks.

SERVICE PARTS

HOUR / MAINTENANCE METER

CHECK SAFETY INTERLOCK SYSTEM

CHECK PARKING BRAKE

CHECK ENGINE OIL

CHECK TIRE PRESSURE

BATTERY SERVICE

CHECK MOWER BLADES

CHECK HYDRAULIC SYSTEM

LUBRICATE UNIT

Charge Battery

Purge Hydraulic System

SERVICE & ADJUSTMENTS

ADJUST SEAT

Guide on how to adjust the operator's seat forward, backward, and lock it in position.

ADJUST STEERING LEVERS

Instructions for adjusting the height and position of steering levers for operator comfort.

ADJUST UNIT TO DRIVE STRAIGHT

Adjust Tire Pressure

Steps to check and adjust tire pressure according to recommended specifications.

Adjust Limiter Bolts

How to adjust limiter bolts to control drive wheel speeds for straight tracking.

ADJUST TRANSAXLES

Check For Excessive Creep

Procedure to check for and adjust excessive creep in the transaxles.

ELECTRICAL SERVICE

Replace Fuse

Steps for replacing a blown fuse, determining the cause, and installing a new one.

Replace Relay

Procedure for replacing a defective relay, identifying the cause, and installing a new one.

REPLACE MOWER BELTS

Remove PTO Belt

Steps to remove the PTO belt, including releasing idler spring tension.

REPLACE TRANSAXLE DRIVE BELT

Remove Transaxle Drive Belt

Steps to remove the transaxle drive belt from the unit's drive system.

Install Transaxle Drive Belt

REMOVE AND INSTALL MOWER DECK

Remove Deck

Steps to safely remove the mower deck from the unit, including belt and spring disconnection.

Install Deck

LEVEL AND PITCH MOWER DECK

Check Blade Level and Pitch

Guide on checking blade level and pitch for optimal cutting performance.

Level Mower Deck

Adjust Blade Pitch

TROUBLESHOOTING

STORAGE

SHORT-TERM STORAGE

Procedures for preparing the unit for short-term storage, including cleaning and fuel management.

LONG-TERM STORAGE

Guidelines for storing the unit for extended periods, covering lubrication and battery care.

START-OF-SEASON PREPARATION

Steps to prepare the unit for use after long-term storage, including fuel and battery checks.

ACCESSORIES

SPECIFICATIONS

CE Sound and Vibration

Engines

Customer Responsibilities

Disclaimer

Limitation of Remedy and Damages

Australian Consumer Law

Disclaimer of Further Warranty