EasyManuals Logo

Ariens Sno-tek 24 User Manual

Ariens Sno-tek 24
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
GB - 28
TROUBLESHOOTING
PROBLEM PROBABLE CAUSE CORRECTION
Engine will
not
crank/start.
1. Fuel tank is empty.
2. Fuel shut-off valve
closed.
3. Build up of dirt and
residue around
governor/carburetor.
4. Key switch not in run
position.
5. Engine start switch turned
off.
1. Fill fuel tank.
2. Open fuel shut-off valve.
3. Clean area around
governor/carburetor.
4. Put Key switch into run
position.
5. Turn switch on. See Starting
and Shut Off on page 15.
Engine stops.
1. Out of fuel.
2. Fuel shut-off valve
closed.
3. Mechanical jam in auger
or impeller.
4. Contaminated fuel supply.
5. Faulty spark plug.
1. Fill fuel tank.
2. Open fuel shut-off valve.
3. Turn off engine, remove key,
and wait for all moving parts to
stop. Check for and remove
obstruction and repair before
restart.
4. Replace with clean fuel.
5. Replace or clean spark plug.
Engine
problems.
1. See Engine Manual.
Does not
operate in
Forward /
Reverse.
1. Friction disc not adjusted
properly.
2. Traction belt not
functioning.
3. Speed selector not
adjusted properly.
1. Repair or replace friction disc
(see Friction Disc Replacement
on page 26).
2. Repair or replace traction drive
belt (see Traction Drive Belt
Replacement on page 22).
3. Adjust speed selector (see
Speed Selector Adjustment on
page 20).
Small rubber
beads collect
in frame
1. Friction disc wear. 1. Normal friction disc wear.
Chunks or large pieces of
rubber mean friction disc
should be checked and
replaced as necessary.
Unit throws
snow poorly
or does not
throw snow.
1. Shear bolts broken.
2. Attachment clutch/brake
not adjusted properly.
3. Auger is frozen in place.
4. Ice or debris is
obstructing auger.
5. Attachment drive belt
slipping, worn or
damaged.
1. Replace shear bolts (see Shear
Bolts on page 19).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment on page 23).
3. Move unit to a warm place to
thaw.
4. With the engine off and auger
disengaged, check for
obstructions and remove.
5. Adjust or replace attachment
drive belt (see Attachment
Clutch/Brake Adjustment on
page 23).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ariens Sno-tek 24 and is the answer not in the manual?

Ariens Sno-tek 24 Specifications

General IconGeneral
Clearing Width24 inches
Engine Displacement208 cc
Stage TypeTwo-stage
Fuel TypeGasoline
Intake Height20 inches
Number of Speeds6 forward, 2 reverse
Chute MaterialPolymer
Impeller Diameter12 inches
TransmissionDisc-O-Matic
Fuel Tank Capacity2.9 quarts
Chute ControlManual
Skid ShoesAdjustable
Start TypeRecoil
Tire Size13 x 4 inches
Throw Distance40 feet

Related product manuals