Ariens Sno-Tek 28E User Manual

Step Four:
Install Remote Deflector Cable
1. Slide cable through clip on top of discharge chute pedestal
2. Bend clip closed around cable.
3. Using the wire hook attached to the deflector cable, hook cable
to discharge chute crank.
4. Pull rubber seal cap away from snap fitting.
5. Install snap fitting into cable bracket’s mounting hole located
under the dash.

Ariens Sno-Tek 28E Specifications

General

Brand	Ariens
Model	Sno-Tek 28E
Category	Snow Blower
Language	English