10
EN
5 Press the power button (S) to turn off the appliance (Fig. 17).
Warning!
Always empty the water tank after use so as to avoid limescale formation.
It is recommended to use the strong coffee button (strong taste) to prepare beverages such as es-
presso coffee.
Adjusting the grinding level
Coffee can be ground more or less finely depending on the desired grinding level.
The grinding level affects coffee taste as well as the quality of the cream.
The coffee grinding level can be adjusted using the dial for adjusting the grinding level (T), located inside the
coffee beans container (Fig. 19).
A scale marked with the symbols “+” and “-” is placed on the dial for adjusting the grinding level.
The symbols shown on the dial indicate the grinding level, from coarse to fine.
Try changing this parameter to find the coffee taste you like the most.
Warning!
This operation shall be carried out when the appliance is on, while the coffee beans grinding is in pro-
gress, so as to facilitate the rotation of the grinding level adjustment dial.
Never adjust the grinding level if grinding is not ongoing, since the appliance might get damaged.
Only grind coffee beans.
Turn the dial for adjusting the grinding level (T) towards the “+” symbol for a coarse grinding or towards the “-”
symbol for a fine grinding (Fig. 20).
NOTE: the brewing of ground coffee with the desired grinding is not immediate due to the residual
ground powder left inside the duct.
Brew ground coffee for a few times before adjusting the grinding level again.
The grinding level adjustment defines the amount of brewed coffee.
For a good espresso, taste shall have a perfect balance among sweetness, sourness and bitterness. Coffee
taste is based on several factors, such as the kind of coffee beans, the freshness, and the grinding level.
How to make milk froth for your coffee
1 Place a cup on the cup-holder grid (J) (Fig. 14). Use a large cup.
2 Make coffee (Fig. 21).
Warning!
Danger of burns. Only touch the steam/hot water wand on the rubber part. Do not touch the steel tube.
Danger of burns due to splashes of hot water and steam that may escape from the steam/hot water
wand.
3 Turn the steam/hot water wand (M) towards the drip tray (I) (Fig. 22).
4 Press the steam button (
). The steam/hot water indicator light (O) turns on automatically to indicate
steam is being delivered (Fig. 23). The appliance begins to heat up and to distribute the remaining water.
5 When the steam/hot water indicator light (O) turns on steady, place the milk jug with milk to be frothed
under the steam/hot water wand (M).
6 Deeply introduce the steam/hot water wand (M) into the jug with milk (Fig. 24).
7 Press the steam button (
).
8 Move and spin the jug with milk while steam is being delivered from the wand.
Milk is frothed when froth appears into the container (Fig. 25).
9 Press the steam button (
) again to stop steam delivery.
After each use, deliver steam for a few seconds so as to free the steam wand spout from any milk
residues.
To Next Page
Loading...
