28 ExTensor
Signal IN
(Contd.)
Settings of the DIP switch for input signals (DIP switches 1-3)
For the settings of the input signals use DIP switches1-3.
The position of DIP switches 4-6 is irrelevant to the input signal setting.
i-Act
Voltage input [V]
i-Act
Current input [mA]
i-Act
Potentiometer input
When driving the actuator via a connected potentiometer, an auxiliary voltage of 5 V DC is generated over terminal 53
for poti supply. An additional external voltage supply for the potentiometer is not necessary.
U
– +
Voltage source grounded
U
– +
Voltage source potential-free
I
– +
Current source grounded
I
– +
Current source potential-free
Potentiometer input
0V AI+
+5V
(AI-)
To Next Page
Loading...
