ARIS ExTensor - Actuator Operation Without Modules (Standard); Operation

18 ExTensor
6. Actuator operation without modules (Standard)
6.1 Operation
The Tensor
2
is operated via 3 buttons and a slide switch, located above the actuator´s display. The OLED display makes setting up
the actuator easier by showing text such as letters, numbers and signs.
Navigate between different menu items by using the buttons LEFT [L] & RIGHT [R].
6.1.1 Buttons and switches
The buttons (1) are indicated with
LEFT [L]
MENU [M]
RIGHT [R]
The functionality of the buttons is explained in section "Operating modes".
6.1.2 Operating modes
The different operating modes of the actuator can be selected via the slide switch resp. the MENU button. The actual operating
mode is shown on the display.