ARIS ExTensor - Identification; Approvals; Labeling; Nameplate; Labeling

3ExTensor
1. Identification
This manual is valid for:
Description: Electrical actuator for potentially explosive atmospheres ATEX / IECEx
Type: ExTensor (and add-ons/options)
Further details see chapter 1.2 nameplate / labeling
1.1 Approvals / Labeling
ATEX (Gas)
II 2 G Ex db IIC T6 Gb
ATEX (Dust)
II 2 D Ex tb IIIC T80°C Db
IECEx
IECEx IBE 22.0020X
EU type examination certicate no. IBExU22ATEX1066 X
Type of construction: Flameproof enclosure
1.2 Nameplate / Labeling
The actuators hold two nameplates. They are located on the outside of the actuator.
Plate 1: Metal nameplate with all details for ATEX / IECEx; plate 2: Label with actuator specic data
Metal nameplate ATEX / IECEx details
Label with actuator specic data
(Plate and label examplary)
Description:
Actuator type
Manufacturer information
Ignition protection type
IECEx number
Number of licensing ofce
Power rating
IP protection class
Ambient temperature
Description:
Actuator type
Serial number (YYWW=Construction year+week)
Power rating
IP protection class / Ambient temperature
Equipment features / Options