30
OPERATION AND FUNCTIONS
CONTENTS REMARKS
3. Water supply mode
N
Y
Flow-Sensor Error mode operation
START
Water supply valve ; ON
Water flow pulse Count=0
Y
Y
N
N
Y
N
1) Water supply valve is open when water supply mode starts after separation of ices.
2) Water is supplied by time in case flow sensor has error.
3) Factor valve is variable which can be useful in AS action.
(If water is supplied by Time, maximum water supply time is 15 seconds.)
4.
RT-S 7 ~13 ~19 ~29 ~39 39
Water flow pulse is set to 238 if flow sensor is in normal condition.
In case water flow sensor has error, water supply time is 5.5 seconds.
C C
C
C
C
C
C
C
C
C
C
Water supply check mode
- 5 minutes after water supply the status can be checked by RT-sensor and increase of
temp Ice-sensor.
1 sec passed after water
valve ON?
Water flow pulse >10
Water flow pulse >Pulse spec.
water supply time> time spec.
Water supply valve ; OFF
STOP
I-S -10 -9 -8 -7 -6 -5
C
To Next Page
Loading...
Need help?
General
