Aritech 2X-A Series Installation Manual

Chapter 3: Configuration and commissioning
50 2X-A Series Installation Manual
Configuration options
The options listed below are available when making configuration changes to the
control panel.
The control panel configuration (and configuration revision) is only updated when
configuration changes are applied by pressing F3 (Apply).
The configuration revision change and timestamp are recorded in the Revision
report and can be accessed at operator, maintenance, and installer levels.
Table 21: Configuration control options and keys
Option
Key
Description
Save
F1
Saves the current configuration change without applying it immediately.
Apply
F3
Applies the current configuration change and all stored (saved)
configuration changes. The control panel resets automatically.
Discard
F4
Discards all stored (saved) configuration changes that have not been
applied.
Exit
F2
Exits the configuration process without storing or applying the current
configuration change.
Note: When updating multiple configuration settings, we recommend that you
save after each change, and then apply all changes from the Main menu.

Aritech 2X-A Series Specifications

General

Brand	Aritech
Model	2X-A Series
Category	Smoke Alarm
Language	English