Planning and Installation manual VV600/VV602Plus 29
7. THE TESTSYSTEM
7.1. VT705P
The VT705P is a testsystem consisting of a testgenerator inside the
VV600/602Plus and a crystal unit which is mounted on the protected object, inside
the detector housing. There are two possiblitities for testing:
1. Test disabled (ex-factory setting).
2. Internal test of the detector’s electronics = Position jumper between connection
1 and 2.
3. Function test of the detector and its physical contact with the protected object
= Position connector from test transmitter VT705P between connection 2 and 3.
7.2. Wiring and commissioning
The VT705P shall be mounted inside the detector, see illustration under 5.4.1. The
VT705P is connected over a 2 Pole plug to the detector.
To Next Page
Loading...
