Ariterm Biomatic+ - User Manual

• Ariterm Biomatic+
INSTALLATION AND OPERATING
INSTRUCTIONS

Summary

General Information

Transport, Storage, and Package Opening

Information on how to receive, store, and unpack the Ariterm Biomatic+ boiler unit safely.

Technical Data

Standard Delivery Components

List of components included in the standard package for the Ariterm Biomatic+.

Technical Specifications Overview

Key technical data including performance, dimensions, and electrical values.

Connection Details

Details on pipe and electrical connection points for the Ariterm Biomatic+.

Functional Description

BeQuem Pellet Burner Operation

Details on the automatic ignition and operation of the BeQuem pellet burner.

Safety and Alarms

System Fault Indicators

Information on system faults indicated by a red light and text messages on the display.

Control Panel

Control Panel Components Overview

Identification and function of buttons and indicators on the Ariterm Biomatic+ control panel.

Burner Operating Principle

Underfeeding Pellet Delivery

Explanation of the underfeeding principle for pellet delivery to the burner head.

Boiler Installations

Installation Space Requirements

Guidelines for the necessary free space around the boiler for installation and maintenance.

Flue Pipe and Air Intake

Specifications for flue pipe connection and ventilation air intake for the boiler.

Pipe and Safety Valve Installation

Instructions for pipe installation, dirt traps, and safety valve requirements.

Electrical Installation and Commissioning

Guidelines for electrical connections and pre-commissioning checks.

Pipe Installations

Piping Diagram and Components

Diagram showing the piping connections for the Ariterm Biomatic+ heating system and component labels.

Wiring Diagram

Control Card Wiring

Diagram illustrating the wiring connections to the control card of the Ariterm Biomatic+.

Start-Up and Stop

Burner Start-up and Stop Procedures

Instructions for turning the burner and internal pump on and off, including operating modes.

Cold and Hot Start Operations

Procedures for initiating cold and hot starts, detailing ignition sequences and energy saving.

Burner Settings

Combustion and Electrical Resistance Settings

Configuration of combustion parameters and electrical resistance for heating.

External Auger Adjustment Example

Guidance on adjusting the external auger operating time for pellet feeding.

Burner Parts

Burner Component Identification

Identification of key components within the burner assembly for maintenance.

Menu Structure

Main Menu and Core Settings

Primary menu structure showing core settings like boiler temperature, flue gas, and burner status.

Adjustment and Accessory Menus

Menu sections for general adjustments, accessory configuration, and test outputs.

Power, Maintenance, and Heating Circuit Settings

Sections for power setup, maintenance tasks, and configuring heating circuits.

Menu Structure (Continued)

Burner Adjustments and Operating Time

Detailed settings for burner adjustments, including electrical resistances and operating time statistics.

Menu Structure (Continued)

Pellet Store and Power Adjustment

Menu options for monitoring pellet levels and adjusting burner power parameters.

Service Menu

Menu options for service-related alarms like ash removal and cleaning intervals.

Menu Structure (Continued)

Accessories and Heat Regulation

Menu options for accessories, heat regulation, electrical installations, and general information.

Heating Circuit Settings

Heat Regulation Menu Parameters

Settings for determining supply water temperature based on outdoor conditions and compensation.

Circulation Pump Control

Function to control the circulation pump based on outdoor temperature, with a daily run-time.

Heat Regulation Examples

Heating System Setting Examples

Example settings for floor and radiator heating systems with varying insulation levels.

Heat Regulation Menu Structure

Drop Menu and Heat Regulation 2

Menu for setting temperature drops and adjusting a second heating circuit.

Alarms and Troubleshooting

Flame Detection and Cold;Hot Start Alarms

Troubleshooting steps for alarms related to flame detection during burner start-up phases.

Residual Oxygen and System Faults

Causes and solutions for residual oxygen alarms and general system fault indicators.

Alarms and Troubleshooting (Continued)

Pellet Shortage, Heat Sensor, and Flue Gas Alarms

Troubleshooting for pellet shortage, heat sensor faults, and maximum flue gas temperature.

Electronics, Overheat, Tacho, and Cleaning Alarms

Addressing alarms related to electronics, overheat, blower rotation, and maintenance reminders.

Guarantee and Decommissioning

Warranty and End-of-Life Information

Details of the two-year guarantee period and guidelines for decommissioning the boiler.

Most Common Spare Parts

Spare Parts List

List of common spare parts with their corresponding product numbers for maintenance.

Service and Maintenance

General Maintenance and Safety Precautions

Guidelines for maintaining the boiler and burner, emphasizing safety during work.

Boiler and Burner Cleaning Procedures

Detailed steps for cleaning the boiler's internal parts and the burner assembly.

Boiler Cleaning

Automatic Convection Cleaning

Description of the automatic system and manual cleaning of convection channels.

Other Boiler Cleaning Operations

Instructions for cleaning the combustion vessel, flame detector, and associated components.

Wood Pellets as Fuel

Fuel Recommendations and Storage

Technical specifications for wood pellets and guidelines for fuel storage.

Feeding System

Silo and Pellet Transfer Systems

Information on the PS300 silo and Depo/Feedo pellet transfer systems.

Declaration of Conformity

Manufacturer Compliance Statements

Statements of conformity to EU directives and applied standards by the manufacturer.

Installation Report

Burner Adjustment and Installation Record

Instructions for burner adjustment using a flue gas analyser and fields for installation details.

Ariterm Biomatic+ Specifications

General

Brand	Ariterm
Model	Biomatic+
Category	Boiler
Language	English