Transfer to a Standing and raising aid
Put the sling around the patient.
Attach the sling to the standing and raising aid.
Gently raise the standing and raising aid.
Take off the safety belt and put it
around the upper part of the hand
rest.
Release the brakes of the standing and raising aid and
slowly move it and the patient away from the Alenti lift.
8
7
9
Lower the Alenti lift.
1
Position the standing and
raising aid in front of the
patient.
Position the patient’s feet onto the
standing and raising aid foot support.
2
3
6
5
Fold back the hand rest away
from the patient.
4
Apply brakes
Leave the Alenti lift
brakes unlocked.
Apply brakes on
the standing and
raising aid.
08.CD.09_1EN • 09/2020 • Page 4/8
To Next Page
Loading...
