Bolster ination and deation (Auralis Plus only)
Bolster deation:
Locate the valve symbol (A).
Turn the valve (B) on the bolster fully clockwise
Repeat on the other bolster, if required.
Leave to deate for 5 minutes.
Note: Deate bolsters before reducing the bed frame
width.
Bolster ination:
Locate the valve symbol (A).
Turn the valve (B) on the bolster fully anticlockwise
Repeat on the other bolster, if required.
Leave to inate for 8 minutes.
Note: Extended bed frame width before inating the
bolsters.
Risk of injury or discomfort
Deactivate transport mode
A
A
B
B
Bolster congurations:
• One bolster inated (left or right)
• Both bolsters inated (left and right)
• Both bolsters deated (left and right)
ArjoHuntleigh AB
Hans Michelsensgatan 10
211 20 Malmö, Sweden
www.arjo.com 08.AI.02EN_04 • 09/2022 • Page 4/4