32
using the control handset or dual control panel.
When the patient is seated in the new position, and
you wish to remove the sling. Pull each cord up
from the locking cleats and slacken the cords
sufficiently to release the Loop LockTM fitting,
and then remove the cords from the sling.
Pull apart the "Velcro" fastening to remove the
support strap.
Remove the sling from the patient. Remove the
lower leg straps if they have been applied.
Warning: If the patient lacks sitting
balance and has been returned to sit on the
side of the bed a second attendant may be
needed to support the patient while the
sling is being removed.
Standing and Raising Slings- with loop and lock
To Next Page
Loading...
