45
Care and Maintenance
NOTE!
If the product does not work as intended,
immediately contact your local ARJO
representative for support.
Daily checklist
The following procedures must be followed before
each use:
• Charge the batteries. Park the lift on the charger
whenever the lift is not in use.
• Inspect the lift for any damage. If the lift casing
does not look properly aligned, or there are any
cracks or other damage on the lift, or any parts are
missing – do not use it. Contact your local
ARJO representative to have the lift serviced.
• Inspect the strap for any visible signs of wear,
frays, loose threads or other damage. If there is
any evidence of damage – do not use it. Contact
your local ARJO representative to have the lift
serviced.
• Inspect the sling for tears, frayed straps or loose
stitching. If the sling has any of the above damage
– do not use it. Contact your local ARJO
representative to have the sling replaced or
repaired.
• Inspect the spreader bar for any signs of cracking
or damage.
• Ensure the split ring and cotter pins that attach the
spreader bar to the strap are secured.
• Before each use, make sure all end stoppers
are in place and tightened.
Inspection and cleaning
Clean the Maxi Sky
600
with a soft dry cloth, or a soft
cloth slightly moistened with a mild detergent
solution. Do not use phenol, chlorine or any other
type of solvent that may damage the finish.
To ensure a better rolling surface for the trolley
wheels, clean the inside of the track every 4 months.
To do so, insert a damp cloth in the opening and slide
it from one end of the track to the other.
WARNING:
Always reinstall the rail end stoppers (if
removed) after servicing.
To Next Page
Loading...
